|
WSI recently replicated the DAF CF 85 Space Cab Flatbed
Truck with Palfinger PK 78002 Knuckleboom Crane and Jumbo Extendable Flatbed Trailer with Container Loads
in
honor of Alb. Swijnenburg, a reliable distribution partner
throughout Europe.
Item number:
01-1292 |
Four components make up this 1/50 scale SET:
• The flatbed
truck • An extendable trailer • And 2 container loads |
|
|
One of the outstanding features of the flatbed truck is the Palfinger PK 78002 Knuckleboom crane,
which easily rotates a full 360 degrees when it is extended
upward to clear the back of the cab.
For an
impressive display pose, fully extend the crane and attach
the jib. Be sure to extend the outriggers and attach the
outrigger pads for stability. |
The cab of the truck has a lot of intricate details including:
• Dual mirrors on both doors • Headlights and caution lights
with plastic lenses • Painted license
plate • And a DAF graphic on the grill
Also, the interior of the cab features
realistic:
• Seats • Steering wheel • Dash
• And middle console |
|
|
The cab tilts forward to reveal some spectacular engine details
including the Paccar graphic on the engine. |
There are multiple storage boxes on both sides of the truck
located underneath the driver's side of the cab and the flatbed.
There are even a couple of "Y" shaped storage boxes between the
rear wheels. |
|
|
With the crane in transportation mode, this
portion of the model measures 8.625 inches long, 2.5 inches
wide, and 3 inches tall.
The free-rolling wheels
have red and yellow hub detailing with realistic tread on the
tires. If you look closely, you can see that the drive wheels have
different hubs than the non-drive wheels. |
The chassis has been impressively replicated with two forward axles and one
rear steering axle. In addition, it has a rear drive axle
with a clearly distinguished drive line and differential.
|
|
Next is the
"Jumbo" extendable trailer which expands for larger loads in two separate places, one in the middle and the other at the end.
With the trailer completely extended, it measures 9.25 inches
long, 2 inches wide, and .875 inches tall. |
|
|
A European permanent fifth wheel with a pin hitch, along with
nicely modeled coiled air hoses and electrical lines, can be seen
on the flatbed trailer's chassis. Also notice the
twin rear axles with floating suspensions along with red/yellow detailed hubs and realistic tire tread.
The very tail-end
of the trailer features taillights with plastic lenses, a license
plate, and mud flaps. |
With the containers removed (which we will discuss in a
moment), you can easily see the
realistic details of the wood grain.
Load stabilizing
rods for the flatbed and trailer are included and can be used
with any load you choose. |
|
|
Last, but certainly not least, let's check out the diecast
metal containers. These containers stand out from others
with their authentic Alb.
Swijnenburg graphics on both sides of the ridged containers along with
nice cast detailing on the sides and doors, including silver
painted latches.
Each of these containers measures 4.75 inches long, 1.875 inches
wide, and 2 inches tall. |
With all of the components showcased together this impressive
model measures 15.25 inches long, 2.5 inches wide, and 3 inches
tall. |
|
Join us again next week when we explore the features of another
exciting model! |